Home / Shop / Cases / Arterial Water-box / SC Arterial 2 560mm External Water-cooling System

SC Arterial 2 560mm External Water-cooling System

In stock

Order processing time 1-2 days.

  • 560mm external water-cooling system
  • Supports unlimited radiator thickness and push-pull fan configurations
  • Integrated distribution plate with reservoir, pump tops and pump covers
  • Integrated PCB lighting for the distribution plate
  • CNC-machined components with cast acrylic distribution plate
  • Stainless steel fasteners for durable assembly

Manuals

US$399.00

Select Acrylic Cover Color/Finish Options
None Satin Black Gloss Black Gloss White Carbon Mirror Silver Mirror Gold Mirror Satin Black

The distribution plate will remain transparent, this colour is only for the case and distribution plate cover panels.
(Satin Black shown in product images, if you select none you will receive Satin Black.)

Select D5 Retention Ring Colour x2 (included)
None Black Silver Black

 Protium Retention Ring
Protium 3.0 uses a retention ring design instead of threaded caps. This allows for 360-degree rotation of the reservoir caps, and it is far more durable than caps which thread onto the inside of the reservoir tube. They are built from CNC Machined Anodized Aluminum and do not contact the fluid. They are compatible with Protium 3.0 ARGB 150 D5 Reservoir Combos, Protium 3.0 Reservoir 200mm and backwards compatible with Protium 1.0 and 2.0.

Optional Add-Ons

Enhance your purchase with these recommended extras

Water Cooling

Select D5 Pump Cover Options x2 (optional) USD $78
None Black +US$78.00 Silver +US$78.00

Protium D5 Pump Cover
The SC Protium 3.0 ARGB Pump Cover is built from thick CNC machined anodized aluminum and comes in Black and Silver. It has an integrated ARGB/DRGB PCB which also acts as the rear cover for the D5 Pump. The Pump Cover glows from the back with LEDs around the perimeter of the rear cover. The cover has a 3-piece design for compatibility with all D5 pumps including the Aquacomputer D5 Next.

D5 Pump x2 (optional) USD $208
None Yes +US$208.00

Protium D5 Pump
The Protium 3.0 D5 Pump is compatible with all products which fit a D5 pump. The D5 pump has legendary reliability and performance. We have used it in almost every system we have ever built. The pump moves 1500LPH of fluid and has a head pressure of 3.7M. It has a Molex connector for power and a PWM connector to control the RPM.

Additional options

Mini-Node Hub (optional) USD $39
None Yes +US$39.00

Mini-Node Hub
An active powered hub with unique temperature based RPM control achieved through hardware only for standalone use. No software, firmware or connection to an operating system or BIOS is needed. The Mini-Node Hub has two PWM zones, one for up to x8 fans and another for x1 pump, both controlled by the same temperature sensor input. For the fans the RPM range is 30-100% and for pumps 50-100% and the minimum RPM can be adjusted within this range via the potentiometers. Both PWM zones can be switched between the onboard temperature based RPM control and the usual motherboard RPM control via switches, and there are input cables for the fans and pump so that the RPM can be controlled and/or read via the motherboard or another controller. It has an adaptor cable which plugs in via a 4pin ATX connector which has x2 SATA and x2 Molex for powering D5 pumps. There is an 8pin PCIE input connection for power for up to 150W of total power.

Mega-Node Hub (optional) USD $49
None Yes +US$49.00

Mega-Node Hub
An active powered hub with unique temperature based RPM control achieved through hardware only for standalone use. No software, firmware or connection to an operating system or BIOS is needed. The Mega-Node Hub has two PWM zones, one for up to x16 fans and another for up to x2 pumps, both controlled by the same temperature sensor input. For the fans the RPM range is 30-100% and for pumps 50-100% and the minimum RPM can be adjusted within this range via the potentiometers. Both PWM zones can be switched between the onboard temperature based RPM control and the usual motherboard RPM control via switches, and there are input cables for the fans and x2 pumps so that the RPM can be controlled and/or read via the motherboard or another controller. It has an adaptor cable which plugs in via a 4pin ATX connector which has x2 SATA and x2 Molex for powering D5 pumps. There are two 8pin PCIE input connections for power for up to 300W of total power, only one needs to be connected for function depending on the amount of components connected.

Ultra-Node Hub (optional) USD $69
None Yes +US$69.00

Ultra-Node Hub
An active powered hub with unique temperature based RPM control achieved through hardware only for standalone use. No software, firmware or connection to an operating system or BIOS is needed. The Ultra-Node Hub has two PWM zones, one for up to x16 fans and another for up to x2 pumps, both controlled by the same temperature sensor input. For the fans the RPM range is 30-100% and for pumps 50-100% and the minimum RPM can be adjusted within this range via the potentiometers. Both PWM zones can be switched between the onboard temperature based RPM control and the usual motherboard RPM control via switches, and there are input cables for the fans and x2 pumps so that the RPM can be controlled and/or read via the motherboard or another controller. It has an adaptor cable which plugs in via a 4pin ATX connector which has x2 SATA and x2 Molex for powering D5 pumps. There are two 8pin PCIE input connections for power for up to 300W of total power, only one needs to be connected for function depending on the amount of components connected. There are 3 ARGB output connections which can optionally be controlled via the FanGuardian PowerBoard controller (available separately). There is also an input connection for the FanGuardian.

FanGuardian PowerBoard Controller (optional) USD $149
None Yes +US$149.00

Fanguardian PowerBoard Controller
The FanGuardian PowerBoard Controller can be used with many of our newer PowerBoards. It is a 3.5” touch screen in a hard case. It controls ARGB lighting colors and has different effects and functions. It monitors RPMs, temperatures and voltages. It has an inbuilt Ambient Temperature Monitor. A low RPM warning can be set on all PWM channels. It has updateable Software/Firmware and we will continue adding features.

  • 1x SC Arterial 2 560mm External Water-cooling System
    US$399.00

Subtotal excludes shipping & tax

All US Tariff Costs Covered By Singularity Computers
  • Made In Australia
  • Lifetime warranty & expert support
Fully secured - SSL CheckoutAccepted payment methods
EAN: 9351182005941 SKU: SC-ART2-560-EWS Category:

Description

Read More +Read Less − full description

Arterial 2 560mm External Water-cooling System. It fits up to a 560mm radiator of unlimited thickness and can fit push pull fans. It has a distribution plate which integrates a reservoir, pump tops and pump covers. There is an integrated ARGB PCB which lights up the distribution plate. All components are CNC machined, the distribution plate is made from cast acrylic and the fasteners are stainless steel.

Youtube video

Specifications

Distribution Plate. Clear Cast Acrylic. CNC Machined.
D5 Pump Tops. X2. Clear Cast Acrylic. CNC Machined.
D5 Pump Covers Black. x2. Clear Cast Acrylic. CNC Machined.
D5 O-rings. X2. Clear Silicone.
Dimensions: L: 550mm x W: 385mm x H: 200mm.
Weight: 8kg.
Packaged Dimensions: L: 600mm x W: 400mm x H: 200mm.
Packaged Weight: 9kg.

Installation:
See manual link above.

Explore more boxes or add something extra to your order.

RELATED PRODUCT

Items you've looked at

RECENTLY VIEWED

See what other people have built, look through the full photography, or pick up display layouts for your screen.

NOT SURE WHERE TO START?