Home / Shop / Cases / Rackmount / SC Enterprise 4U Rackmount Water-box

SC Enterprise 4U Rackmount Water-box

In stock

Order processing time 1-2 days.

  • 4U rack-mount dedicated water-cooling system
  • Supports up to 3x 360mm radiators 60mm thick
  • Integrated distribution plate to improve connections to radiators.
  • Up to 2500W of cooling.
  • Includes SFX PSU mount

Manuals

US$399.00

Optional Add-Ons

Enhance your purchase with these recommended extras

Distribution Plates

Dual D5 Reservoir Distribution Plate (optional) USD $199
None Yes +US$199.00


A different rear panel for the case which has a distribution plate mounted to it. The distribution plate has an integrated reservoir and two D5 pump tops.

SC Enterprise 2U Dual D5 Reservoir Distribution Plate (optional) USD $349
None Yes +US$349.00


The Rackmount 2U Dual D5 Reservoir Distribution Plate has a reservoir and two D5 pumps in series for a powerful dual loop setup with redundancy. It can be used with any rackmount water-cooling system to add a pump reservoir combo. It mounts directly to the front of a standard 19” rack. It has an inlet, outlet and fill and drain port.

SC Enterprise 2U Quad D5 Distribution Plate (optional) USD $449
None Yes +US$449.00


A 2U Rackmount distribution plate with four D5 pumps with two pairs in series for a powerful dual or single loop configuration with redundancy. It can be used with any rackmount water-cooling system to boost flow. It mounts directly to the front of a standard 19” rack. It has an inlet and outlet port for each pair of D5 pumps, and the outlet of the first pair can be connected to the inlet of the second pair for four D5 pumps in series. There is also a fill and drain port for each pair of D5 pumps on the front but this distribution plate will need to be paired with a reservoir.

Water Cooling

D5 Pump x2 (optional) USD $208
None Pump x2 +US$208.00

Protium D5 Pump
The Protium 3.0 D5 Pump is compatible with all products which fit a D5 pump. The D5 pump has legendary reliability and performance. We have used it in almost every system we have ever built. The pump moves 1500LPH of fluid and has a head pressure of 3.7M. It has a Molex connector for power and a PWM connector to control the RPM.

D5 Pump x2 (optional) USD $208
None Pump x2 +US$208.00

Protium D5 Pump
The Protium 3.0 D5 Pump is compatible with all products which fit a D5 pump. The D5 pump has legendary reliability and performance. We have used it in almost every system we have ever built. The pump moves 1500LPH of fluid and has a head pressure of 3.7M. It has a Molex connector for power and a PWM connector to control the RPM.

D5 Pump x4 (optional) USD $416
None Yes +US$416.00

Protium D5 Pump
The Protium 3.0 D5 Pump is compatible with all products which fit a D5 pump. The D5 pump has legendary reliability and performance. We have used it in almost every system we have ever built. The pump moves 1500LPH of fluid and has a head pressure of 3.7M. It has a Molex connector for power and a PWM connector to control the RPM.

Additional options

Mini-Node Hub (optional) USD $39
None Yes +US$39.00

Mini-Node Hub
An active powered hub with unique temperature based RPM control achieved through hardware only for standalone use. No software, firmware or connection to an operating system or BIOS is needed. The Mini-Node Hub has two PWM zones, one for up to x8 fans and another for x1 pump, both controlled by the same temperature sensor input. For the fans the RPM range is 30-100% and for pumps 50-100% and the minimum RPM can be adjusted within this range via the potentiometers. Both PWM zones can be switched between the onboard temperature based RPM control and the usual motherboard RPM control via switches, and there are input cables for the fans and pump so that the RPM can be controlled and/or read via the motherboard or another controller. It has an adaptor cable which plugs in via a 4pin ATX connector which has x2 SATA and x2 Molex for powering D5 pumps. There is an 8pin PCIE input connection for power for up to 150W of total power.

  • 1x SC Enterprise 4U Rackmount Water-box
    US$399.00

Subtotal excludes shipping & tax

All US Tariff Costs Covered By Singularity Computers
  • Made In Australia
  • Lifetime warranty & expert support
Fully secured - SSL CheckoutAccepted payment methods
EAN: 9351182005354 SKU: SC-RACK-4U-WB Categories: ,

Description

Read More +Read Less − full description

A 4U Rackmount Chassis for a water-cooling system which can fit up to 2500W of cooling. It fits up to 3x 360mm radiators and has a built-in distribution plate to allow clean and easy connections between the radiators. It comes with an SFX PSU Mount so that it can be powered independently from the main system.

Singularity Computers Enterprise:
Singularity Computers Enterprise is a product line designed for professional and enterprise use. All Singularity Computers products have a lifetime warranty but our Enterprise line goes through a far more stringent development and testing process. They use higher end materials and manufacturing processes for tighter tolerances and a higher pressure and temperature resistance.

           

Specifications

SC Enterprise 4U Rackmount Water-box: Steel powder coated. 5052 Aluminum. Folded. Anodized.
Distribution Plate CNC Machined Clear Cast Acrylic.
Fasteners: Stainless Steel.
Gaskets: Silicone Black.
Radiators: Up to 3x 360mm up to 60mm thickness with standard 25mm thick fans.
Fans: Up to9x 120mm x 25mm.
Water-cooling Passthroughs: x2 20mm for bulkhead fittings.
PSU Mount: SFX.
Dimensions: L: 447.8mm x W: 430mm x H: 172.3mm.
Weight: 10kg.
Packaged Dimensions: L: 450mm x W: 450mm x H: 150mm.
Packaged Weight: 11kg.

Installation:
See installation manual at the link above.

Items you've looked at

RECENTLY VIEWED

See what other people have built, look through the full photography, or pick up display layouts for your screen.

NOT SURE WHERE TO START?