Case Accessories36 products
Cases50 products
- Dominus1 product
- Absolute Case6 products
- Arterial Water-box3 products
- Phantom 2 Case3 products
- Portal Wall Mount Water-cooling Case1 product
- Rackmount4 products
- SC Test Bench4 products
- Spectre 4 Water-cooling Case17 products
- Spectre 4-M Water-cooling Case5 products
- Stream Water-cooling Case6 products
Custom Cables8 products
Distribution Plates54 products
- Asus1 product
- Caselabs2 products
- Corsair1 product
- Desk Distribution Plates2 products
- Distribution Plate Pump Tops & Covers5 products
- EVGA1 product
- Fractal1 product
- HAVN1 product
- Hyte2 products
- Inwin1 product
- Lian Li12 products
- NZXT1 product
- Phanteks4 products
- Rackmount2 products
- Singularity Computers Cases3 products
- Universal Pump/Reservoir16 products
PowerBoard18 products
Water Cooling75 products
- Axiom ARGB D5 Reservoir Combo1 product
- Conduit Pump Reservoir Combo2 products
- Coolant2 products
- DDC Cover1 product
- Fittings14 products
- Cerakote Fittings13 products
- Protium 3.0 Accessories24 products
- Protium 3.0 ARGB 150 D5 Reservoir Combo3 products
- D5 Pump1 product
- Reservoir & Pump Mounts8 products
- Resonance 2.0 ARGB Pump Reservoir Combo4 products
- Tube1 product
- Water-blocks1 product

Spectre 4 PSU Shroud & Rear IO Distribution Plate Set
The Spectre 4 PSU Shroud & Rear IO Distribution Plates are designed for both Spectre 4 & Spectre 4 Aevum Water-cooling Cases and are compatible with all addons. They can be used in single or dual loop mode, with or without the Spectre 4 & Spectre 4 Aevum Dual Loop Side Panel. They can also be used independently of each other. The Rear IO Distribution Plate attaches to the Rear IO Panel above the GPU, it has pass throughs for the Dual loop Side panel with a cover which can be attached to cover up the pass throughs if the Dual Loop Side panel is not being used. The PSU Shroud Distribution Plate can be used with horizontal or vertically mounted GPUs. It sits on top of the PSU shroud and works well with GPU water-blocks which have ports on the end. Similar to the Spectre Elite Front and Top Panel Distribution Plates, these Distribution Plates are primarily designed to improve aesthetics although they can improve the loop layout in some scenarios.
US$99.00 – US$299.00Price range: US$99.00 through US$299.00
Specifications:
Spectre 4 PSU Shroud & Rear IO Distribution Plate Set.
LED Strip: 30cm ARGB 5V with 50cm black cable.
Materials: Cast Acrylic.
Gaskets: Silicone Black.
Fasteners: Stainless Steel Silver.
Manufacturing Process: CNC Mill. CNC Router. Laser Cutter.
Assembly: Assembled by hand.
Testing/Validation: All Distribution Plates are factory pressure tested and precise fastener tension is applied.
Dimensions: L: 320mm x W: 120mm x H: 36mm.
Weight: 2kg.
Packaged Dimensions: L: 400mm x W: x150mm x H: 50mm.
Packaged Weight: 2.5kg.
Compatibility:
Spectre 4 Water-cooling Case.
Spectre 4 Aevum Limited Edition Water-cooling Case.
Spectre 4 Aevum Valhalla Limited Edition Water-cooling Case.
Spectre 4 Aevum Dark Water-cooling Case.
Rear IO Distribution Plate Only:
Spectre 4 Enterprise.
Spectre 4 Quantum.
Installation:
Both Distribution Plates are designed for both Spectre 4 and Spectre 4 Aevum Limited Edition Water-cooling Cases and are compatible with all addons. They can be used in single loop or dual loop scenarios also with the Spectre 4 and Spectre 4 Aevum Dual Loop Side Panels. When the dual loop side panel is used the cover can be removed on the Rear IO Distribution Plate to reveal two extra pass throughs underneath for tubes.
The PSU Shroud Distribution Plate replaces the original PSU Top Shroud Acrylic parts on Spectre 4 Aevum Water-cooling Case and installs onto the aluminum PSU Top Shroud. On Spectre 4 it installs directly onto the Aluminum PSU Top Shroud.
The Rear IO Distribution Plate installs onto the inside of the Rear IO Panel on both Spectre 4 and Spectre 4 Aevum Limited Edition Water-cooling Cases.